40G QSFP+ SWDM4 850-940nm MMF 240M OM3 LC Connector Optical Module
Hilink 40G QSFP+ SWDM4 transceiver modules are designed for use intransceiver modules are designed for use in 40G Ethernet links over duplex multimode fiber. Four channels/lanes in the 850-940nm region @ 10Gbps to transport the Ethernet signal. Digital diagnostics functions are available via an I2C interface, as specified by the QSFP+ MSA.
Features
- Compliant with QSFP+ MSA
- Compliant with SWDM MSA
- Compliant with SFF-8636
- Compliant with IEEE 802.3ba
- Hot-pluggable QSFP+ form factor
- 4x10Gb/s VCSEL-based SWDM transmitter
- Supports 41.2Gbps aggregate bit rate
- Power dissipation<3.5W
- Maximum link length of 240m on OM3 MMF and 350m on OM4 MMF
- Case temperature range of 0°C to 70°C
- Duplex LC receptacles
- XLPPI electrical interface
- RoHS compliant
Specifications
| Item No. | HL-QSFP-SWDM4 | Vendor Name | Hilink |
| Form Type | QSFP+ | Max Data Rate | 40Gbps |
| Wavelength | 850-940nm | Max Cable Distance | 350M |
| Interface | LC Duplex | Optical Components | VCSEL |
| Cable Type | MMF | DOM Support | Yes |
| Commercial Temperature Range | 0 to 70°C (32 to 158°F) | HTS-Harmonized Code | 8517706000 |
| Transmitter Parameter | Lane | Min | Typical | Max | Unit | Note |
| Signaling rate, each lane | | 10.3125 , 9.953±100ppm | Gb/s | |
| Lane Wavelength Range | Lane0 Lane1 Lane2 Lane3 | 844 874 904 934 | | 858 888 918 948 | nm | |
| Difference in launch power between any two lanes | | | | 4.5 | dBm | |
| RMS Spectral width @850nm @880nm,910nm,940nm | Lane0 Lane1,2,3 | | | 0.53 0.59 | nm | |
| Optical Modulation Amplitude (OMA), each lane | | -5.5 | | 3 | dBm | |
| Average Launch power per Lane | | -7.5 | | 3 | dBm | |
| Launch Power Tx OMA-TDP | Lane0 Lane1 Lane2 Lane3 | -6.4 -6.0 -6.5 -7.0 | | | dBm | |
| Transmitter and Dispersion Eye Closure | Lane0 Lane1 Lane2 Lane3 | | | 3.7 4.0 4.5 5.0 | dB | |
| Extinction Ratio | | 2 | | | dB | |
| Optical Return Loss Tolerance | | 12 | | | dB | |
| Average Launch Power per Lane @ TX Off State | | | | -30 | dBm | |
| Encircled Flux | | >=86% at 19um <=30% at 4.5um | | |
| Transmitter eye mask definition {X1, X2, X3, Y1, Y2, Y3} Hit ratio 5x10-5 hits per sample | | {0.23,0.34,0.43,0.27,0.35,0.4} | |
| Receiver Parameter | Lane | Min | Typical | Max | Unit | Note |
| Signaling rate, each lane | | 10.3125 , 9.953±100ppm | Gb/s | |
| Lane Wavelength Range | Lane0 | 844 | | 858 | nm | |
| Lane1 | 874 | | 888 |
| Lane2 | 904 | | 918 |
| Lane3 | 934 | | 948 |
| Damage threshold, each lane | | 3.8 | | | dBm | |
| Average Receive Power, each lane | | -12.9 -12.5 -12.2 -11.9 | | 2.4 | dBm | |
| Receiver Power, each lane (OMA) | | | | 3 | dBm | |
| Receiver sensitivity OMA, per lane | | | | -9.1 | dB | |
| Difference in receive power between any two lanes(OMA) | | | | 5 | dB | |
| RX_Los_Assert | | -30 | | | dBm | |
| RX_Los_De-ASSERT | | | | -13 | dBm | |
| RX_Los_Hysteresis | | 0.5 | | | dBm | |
| Return reflectance | | | | -12 | dB | |
Hilink optical Transceiver 100% compatibility: Cisco, Huawei, Ciena, H3C, HP, Extreme, Foundry, Brocade, D-link, Alcatel, Mikrotik, Finisar, Netgear, Nortel, Juniper, Ruijie, Zyxel, etc.
Applications
- 40 Gigabit Ethernet over duplex MMF
Details Photos
Hilink Advantages
1. Hilink ,a professional manufacturer established in 2007,Specialize in optical network communications with over 10 years experience.
2." Credit is the basis, quality is the first",all our products are new,we never use second-hand components.
3. Our optical transceivers are compatible with Cisco,Huawei, Ciena, H3C, HP, Extreme, Foundry, Brocade, Dlink, Alcatel, Riverstone,
Enterasys, Netgear, Nortel, Juniper, Ruijie, Zyxel, etc.
4. We provide 3 years warranty for all our fiber optical products from the date of shipment.
5. All of our QSFP, QSFP28, QSFP56, QSFP-DD, CWDM/DWDM/Bidi SFP/SFP+/XFP, AOC/DAC products pass CE,ROHS,FCC.
6. We also provide DWDM CWDM WDM optical solutions.
FAQ
1. Can I have a sample order? What is your MOQ?
Sample order is supported for testing the quality of goods. 1 piece is the MOQ.
Mixed samples are acceptable.
2. What is the lead time?
1-3 days after receiving the payment for the regular goods we normally keeping in stock;
For large quantity, you'll get support and details from your sales representative of HilinkTech.
3. What is the shipping way and how long is the period?
DHL, UPS, FedEx or TNT will be taken according to your option. The arrival normally takes 3-5 days .
4. What is your warranty?
3-year warranty.You'll get technique support, replacement or refund.
Product Tags:
|
|
40G QSFP+ SWDM4 LC Connector Optical Module 850-940nm MMF 240M OM3 Images
|
